Stanley Steemer uses a professional, specialized cleaning process to clean hardwood floors, which is designed to be safe, effective, and gentle on the wood. While the exact steps can vary slightly depending on the specific service or the condition of the floor.

Here’s an overview of how Stanley Steemer typically cleans hardwood floors…

Initial Assessment & Preparation

• Inspection – Before starting, the Stanley Steemer technician will assess the condition of your hardwood floors. They’ll check for dirt, stains, scratches, and any areas that may require extra attention.
• Furniture Removal – The team will clear the area of furniture, rugs, and other obstacles so that they have full access to the floor. If needed, they’ll use protective coverings to shield furniture or walls from any potential damage.

Dry Vacuuming or Dusting

• Dry Vacuuming – The first step in the cleaning process is to remove all loose dirt, dust, and debris from the surface. Stanley Steemer uses a high-powered vacuum with a soft brush attachment to ensure that dirt is removed from cracks and crevices without scratching the wood.
• Dusting – In some cases, a microfiber dust mop may be used to pick up any remaining fine dust particles that could potentially scratch the surface during the cleaning process.

Pre-Treatment of Stains or Build-Up

• Stain Spot Treatment – If there are stubborn stains or heavy build-up in certain areas, Stanley Steemer technicians will apply a safe pre-treatment solution to loosen grime, grease, or stains. This solution is specifically formulated to be safe for wood floors and is chosen based on the type of floor finish and the severity of the dirt.
• Gentle Scrubbing (if needed) – In areas where stains or grime are stuck on, a soft brush or microfiber cloth may be used to gently scrub the surface to break down the dirt without damaging the wood.

Hot Water Extraction Cleaning

• Hot Water Extraction – Stanley Steemer uses their truck-mounted hot water extraction system, which is the same technology they use for carpet cleaning, but adapted for hardwood floors. The machine uses a combination of warm water, a specialized wood-safe cleaning solution, and high suction power to remove dirt and grime.
  • This method allows the technician to clean deeply and thoroughly while using minimal water, which is crucial for preserving the integrity of hardwood floors.
• Low-Moisture Cleaning – Unlike traditional mopping, which can leave excess water on the floor, Stanley Steemer uses a low-moisture technique. This helps avoid the risk of water seeping into seams or damaging the wood, while still delivering effective cleaning.

Drying the Floor

• After cleaning, the technician will ensure that the floor dries properly by using high-powered fans or air movers, if necessary. Typically, because the water extraction system removes most of the moisture, your floor should dry relatively quickly, in about 30 minutes to an hour.

Post-Cleaning Inspection & Buffing (if needed)

• Once the floor is clean and dry, Stanley Steemer will perform a final inspection to ensure that all areas have been properly cleaned.
• If desired, the technician may also buff the floor to restore a bit of shine and smoothness. This can help eliminate any streaks and bring out the natural luster of the wood.

Optional Add-Ons (Polishing or Conditioning)

• Polishing – Stanley Steemer also offers a floor polish service as an add-on, which can be used after the cleaning to add a protective layer to the floor. The polish can help fill in micro-scratches and restore a glossy, even shine.
• Conditioning – For floors that may be looking dry or faded, a wood floor conditioner may be applied to hydrate the wood and protect it from future wear.

Key Benefits of Stanley Steemer’s Hardwood Floor Cleaning

• Safe for Hardwood – Their cleaning solutions are specifically formulated to be safe for hardwood floors, so they won’t damage the finish or wood.
• Low Moisture – The use of low-moisture cleaning ensures that there’s minimal risk of water seeping into the wood, which could cause warping, cupping, or discoloration.
• Deep Cleaning – The hot water extraction method ensures that dirt, oils, and grime are thoroughly removed, providing a deeper clean than basic mopping.
• Time-Saving & Professional – Hiring Stanley Steemer can save time and effort, especially for heavily soiled floors. Their professionals have the right equipment to get the job done efficiently.

Final Thoughts

Stanley Steemer’s hardwood floor cleaning is a great option if you want a deep, professional clean without worrying about excess moisture or using harsh chemicals. Their specialized equipment and cleaning solutions make them a solid choice for homeowners who want to restore the beauty of their hardwood floors and keep them looking good for the long run.

If you have specific concerns about your hardwood floors (such as scratches, water damage, or a specific type of finish), it’s a good idea to discuss them with the technician before cleaning. They’ll be able to tailor the service to your needs.